Dangerden Tower 21 Build
Hi pals, in attempts to defeat my executive dysfunction, I am starting a log. I purchased MOST of these parts in the middle of the pandemic in 2020 and 2021, and have been running this computer on air since, despite having water blocks and radiators laying around my...
Hey folks,
I'm at 99% in a build right now, and the only outstanding issue that I haven't solved is fan control.
I'm using 3 fans on a single dewire relay (only need 1 fan control), D5 Vario that doesnt need control. One temp sensor in the water. The way the system is set up right now, the...
Figured this is the best place to post. I want another Dangerden case, and Moonlight mods have gone defunct.
Anybody have a tower26 or the equivalent Q or black edition case laying around?
Hey folks, I have an idea here, tell me if i'm being to paranoid.
I currently have a Dangerden monsoon reservoir with a silver plug in it, and all copper blocks, running distilled water.
I'm looking at current production watercooling stuff, and most of it seems to be nickel and pure copper...
Hey friends,
I have myself a pickle here. I've been using masterkleer clear 7/16" ID 5/8 OD" tubing, friction fit over DD fatboy 1/2" barbs for years now and I want to rebuild.
Problem is that nobody carries this tubing in clear anymore. I want to use this tubing as its worked fantastically...
Preordered this badboy ages ago, immediately used the code to install the game.
The chest is still in the box with the stickers, art, metal case, bobblehead, everything in the original packaging. The only part that was actually opened was the game case itself and the disk removed. You can have...
Hey guys,
I have a case where my bay reservoir interferes with my current 22mm vandal switch. Even with the prongs bent to the side, it still sticks about 1/4 inch out the top of the case.
Anybody know of shorter ones? Or should I just cut a new hole?
Thanks
Heres my dilemma. I have about 10.55 inches between my case backpanel, and my intake radiator. My GTX480, stock, fits in just fine.
I want to get a 290x and put the razor on it, but I'm afraid it wont fit because measurements of the cards are all over the map on the internet.
Anybody...
Asrock Extreme 3 Gen 3 crapped out on me, don't want another Asrock. All the regular stores are out of stock. Shoot me offers.
Heatware is thesecond :)
https://www.youtube.com/watch?v=dU1yMvkdsyY
http://www.techpowerup.com/184912/phanteks-enthoo-primo-case-pictured.html
Clean look, excessive space behind the motherboard tray for tubes and cabling, mobile HDD cages so you can fil lthe thing with rads, and a light up spine reminiscent of...
Sup gents!
My X58 rig is getting quite long in the tooth, and all of these tantalizing declarations of increased IPC and efficiency are rustling my jimmies!
I'm folding in windows, using HFM.net and F@H GPU tracker, got the spicy e5649 running at 3.8ghz with a gtx480 running stock, and...
Have Audio Technica AD-900X headphones, Auzentech Bravura.
Love it, want more.
Anybody played with opamps in one of these? Any recommendations for a different opamp in the headphone output? My internet reading has only really pointed me towards switching the 7.1 opamps and not the...
Sup guise.
I'm working out loop details, figured I'll need a QDC for drainage.
From what i can tell, out there, theres Koolance, Phobya, Aquatuning and Bitspower.
Looking for good flow above all, followed by smallest size. I'm going to be screwing one side directly into a radiator, and the...
Hey guys, my Tritton's have just bit the bullet after 23 months of hearty service. I loved them. They will get a warrior's burial.
Whole thing was my fault really, twisted a cup too much and the whole thing fell apart.
Before you try suggesting a nice pair of stereo headphones, I already...
http://www.evga.com/forums/tm.aspx?m=1677705
From what I've gathered:
1. It has a HANDLE! :p
2. Fully modular
3. Individually sleeved cables come stock. Also has fancy power cable.
4. Has usb interface for real time desktop monitoring of voltages, current draw, temperature, fan speed...
Soup guise?
last month had a great 18k ppd. 4-6 wu's a day, lots of points. 425k points for the month of march.
This month, its grinding down to 1 wu every 2 days. My ppd is reportedly bouncing between 7-13k (says the smp client). I'm halfway through this month and only at 125k ppd - i should...
I will be using a Black Ice Pro (120mm) rad, and a Black Ice Pro II X Flow (240mm) rad.
Looking for lowest noise at highest cooling performance fans - which is a funny thing with these high fpi rads.
So theres the triebwerks 122 (mid speed 1800rpm), treibwerks 123 (ludicrous speed 3000rpm)...
Looking for a set of 3. I cant for the life of me find them in north america, and i dont want to grab the high speed ones and try to ramp them down with a fan controller for fear of clicking a la Scythe Kaze.
EDIT: I'M IN CANADA EH!
PLZPLZPZLPLZ
Hey guys, looking to pick some brains here.
Short of it: Ivy is coming out, I'm tempted to upgrade.
Current system in sig. I see 2 upgrade paths, and I'm curious which one will net me the best gains in both gaming and folding.
It will cost virtually the same to swap my mobo and processor...
So this solved my "bottleneck" problem.
Basically, in bf3, at my settings, i was getting 70 fps averages and 85% usage averages using the 295 drivers and the old precision. Even when I turned down the settings, I'd keep the same 70fps averages and low GPU usage averages. My goal has always...
Rig in sig. GPU utilization never really breaks 85% on either of them. Just spun up BFBC2 and i was hitting 50% usage. Frame rate hovered around 80, with occasional jumps between 60 and 200. I wanted a consistent 120fps+ in bfbc2, and it just wasnt doing it. I know when i run it as a single...
Been having a hell of a time getting my overclock stable on my i7 930, and i think its either my QPI or my ram, just want to verify with the crowd here.
Basics are:
Goal: 4.0ghz cpu, 2000mhz cas10 ram. with 200 blck, x20 cpu multi, x10 ram multi - if i have to i'll do it with 191 bclk on a...
I want a joystick, throttle, and pedals. I'm looking into the ~$300 range, or maybe a bit higher for the set.
Since its a mech, dual throttles are excessive.
Joystick will be for aiming/shooting, pedals for turning, throttle for speed and movement things like jumping.
Force feedback is...
I went looking for them recently and everything above 750 watts seems to be gone.
The x4 series has been removed from the website, and tigerdirect does not offer them anymore. I was hoping to pick up their new 1000 watter for the ultra lifetime warranty, but they're nowhere to be found...
Holy crap this thing is slick. Yes, easily fastest mouse surface i have ever fathomed. The corsair software for my M60 rates it a 5/5 for tracking, compared to the steelseries SX which was 4/5, and the QCK+ which was 3/5.
Its cool, i got the 16x16". Its a dark metallic brown or dirty copper...
Picked up one of these today as a replacement for my very well loved G9X.
Weight: With all weights removed, the M60 is lighter than the G9X equipped with the "wide load" grip and no weights. A definite improvement for me as I have been experiencing arm pain using my G9X for very extended gaming...
I have a KBC poker, works great over USB, but not so much over ps/2.
Basically, sometimes i'll be playing bf3 or whatever, and my directional buttons will act as if they are being pressed, and i will be stuck running in one direction until i tap the button again. It has lead to me crashing...
bought a 4890
Intel 990x or 980x
looking for the a price of aound ~$700. Basically I'm fishing for people who are upgrading to SB-E and want to offload some stuff so I don't have to. :rolleyes: Feel free to make fun of me, I deserve it.
Heat: http://www.heatware.com/eval.php?id=77055
If at...
So my friend bought one of these motherboards, and it wont boot. It keeps cycling power like there's a short, so I had him put on the stock HSF, and put the motherboard on an antistatic bag to rule this out, and it still wont boot.
error goes like this:
press power, fans spin up, error code 15...
Specs:
Black case, Asus Rampage 3 Formula motherboard, xigmatek 140mm black w/white LED fans, and some other stuff in there.
Should i go for the mod smart BLACK or mod smart CARBON FIBRE sleeving?
Black:
http://www.performance-pcs.com/catalog/images/kobra/KBRA-MB24-8X-BK_01.jpg...
Good morning,
As a raging BFBC2 addict, I love my mice. However, I'm currently having issues... arm pain... with the mice that i have.
Please note, i am using a steelseries SX surface- the aluminum one
G9X: love it to death, its the perfect weight (with no weights, very nice and light), love...
Hi all,
Heres the situation. Occasionally, my sound will intermittently cut out. Originally, i just blamed it on creative's drivers on my Auzentech Bravura. However, I have opened up my windows sound properties to watch what happens, and I dont think its the card.
Basically, whenever my sound...
All prices are in canadian :D
PRICES LOWERED :D
Asus p6x58d-e: PENDING PAYMENT
Works great, comes in original box, in the static bag, with all the original candy - sli bridges, manual, sata cables, sticker, and even the install CD! You can use it as a coaster! :D...
hoping im the first to post this :)
http://www.anitec.ca/product/879245/gigabyte-ga-p67a-ud3-b3-intel-p67-express-socket-h2-lga-1155-desktop-motherboard-gap67aud3b3
Would anybody know where i can get Sata hotswap pcb's or plugs?
Heres the situation. I have a thermaltake level 10, and it has 6 drive bays, but only 2 have hot swap plugs. The rest have mounting holes to screw in more plugs, but i have no idea where to buy such a thing. The only other place...